XYZ Calibration Details
Back XYZ Calibration Details Share on facebook Share on twitter Share on linkedin In the BEAR version of the firmware, more detailed information about XYZ calibration results can be viewed. This feature can be found in LCD menu > Support > XYZ cal. details. The first screen tells you the distance of the “perfect” position […]
Extruder Linearity Correction Calibration
Back Extruder Linearity Correction Calibration Share on facebook Share on twitter Share on linkedin This is an advanced calibration, recommended only to experienced users. Linearity correction is based on the Trinamic stepper driver feature that allows defining a custom current-waveform. The default Trinamic waveform is a sine function, but the real waveform can be a […]
HotEnd PID Tuning
Back HotEnd PID Tuning Share on facebook Share on twitter Share on linkedin HotEnd PID tuning is a calibration procedure that ensures the printer holds a stable target temperature at all times. PID (Proportional Integral Derivate) is used on the Original Prusa printers to maintain a stable temperature on the hotend. You can use the […]